Fox Frontier X Bivvy
£474.99
£649.99
Top Kits/Accessories
Active filters
Daiwa EVA Pole End Caps
£5.99
In Stock
Our EVA Pole End Caps are designed to replace traditional hard plastic caps. They are easy to remove and feature raised ribs to protect sections against the tube sides or other pole sections when packed in a hardcase.
Additionally they offer protection to the end of the section when in use. Be it shipping back into any undergrowth or just through handling.
Available in the following sizes; 43.7mm (fits top of 9th), 45.5mm (fits top of 10th), 46.8mm (fits the bottom of 9th & top of 11th), 48.6mm (fits bottom of 10th & 11th) & a pack including 1x 26.7mm & 1x 35.4mm for Top & Bottom of 5th section.
Maver MV-RXX X Series Topkits
£79.99
In Stock
Brand new X-Series 18mm topkits that not only fit the flagship MV-RXX pole, but also other poles on the market sharing the same bore size. To save you both time and money, our topkits come pre-bushed with our revolutionary roller slots pre-installed too.
Maver X-Series 1-piece Power Kits
£79.99
In Stock
Our brand new X-Series 1-piece power kits are designed to fit our MV-RXX flagship model, bearing an 18mm bore.
Just 185cm long, these are ideal for any anglers preferring a shorter length of topkit to gain ultimate control over the fish!
Our revolutionary roller slots come pre-installed, saving you time and money. All that’s left is to add an elastic of choice.
Available in a ‘black’ or ‘smoke’ colour.
Maver MV-R Series Commercial Power Kit
£69.99
In Stock
A spare Commercial Power Kit for your Maver MV-R series pole. Supplied as standard with the R1, R2, R3 and R4 MV-R pole packages. These are ideal if you've managed to damage the top kits supplied with the pole offering you an exact replacement.
Features
- Commercial Power Kit
- Roller slot pre-fitted
- Fits the MVR-R1, R2, R3 and R4 pole range
Maver Signature Smoke 1pc Power Kit
£64.99
In Stock
Signature Smoke Power Kit with slot.
Also fits MV-R Series poles.
Daiwa Generic Interlastic Kits
£59.99
In Stock
- Compatible with UK made poles
- HMC+ Carbon Fibre
- Pre Fitted with Interlastic Puller Bush and PTFE Tip Bush
| MODEL | DESCRIPTION | SECTIONS | LENGTH | WGT | RRP |
|---|---|---|---|---|---|
| GITK4.7-AU | COMMERCIAL KIT, 4.7mm | 2 | 2.4m | 59g | £59.99 |
| GITK5.8-AU | POWER KIT, 5.8mm | 2 | 2.4m | 61g | £59.99 |
| GITKF1S4.7-AU | F1 SPEED KIT, 4.7mm | 1 | 1.83m | 39g | £49.99 |
Daiwa Professional Interlastic Commercial Kit 2.4m - 4.7mm
£154.99
Last items in stock
Two piece Commercial Interlastic kit designed for up to Grey to Black Hydro. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 4.7mm tip
- Fitted with Interlastic plus PTFE bush and No3 nose cone
Daiwa Professional Interlastic Power Kit 2.4m - 5.8mm
£154.99
In Stock
Two piece Power Interlastic kit designed for up to Red Hydro. Taper designed to assist rigidity. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 5.8mm tip
- Taper and rigidity designed for powerful set ups
- Fitted with Interlastic plus PTFE bush and No3 nose cone.
Daiwa Professional F1 Speed Cloud Kit 1.83m - 4.7mm
£124.99
£134.99
- £10.00
In Stock
Redesigned F1 kit bringing enhanced balance and recovery. Features Interlastic and PTFE bush. Cloud finish down to side puller.
- High grade carbon construction
- Single 1.8m section with 4.7mm tip
- Adds enhnaced balance and recovery
- Cloud finish throughout
- Fitted with Interlastic and PTFE bush
Daiwa Professional Match Kit 2.4m - 4.0mm
£139.99
In Stock
Two piece 2.4m match kit. High grade carbon construction. Near equal length sections, with PTFE bush and No3 nose cone. Also features a reinforced wrap for side pullers.
- High grade carbon construction
- 2.4m with 4.0mm tip
- Near equal two section assembly
- PTFE bush and No3 nose cone
- Reinforced wrap for side puller fitting
Daiwa Super 4th Section (Short)
£74.99
Out-of-Stock
As more anglers fish tight to features or with exact lengths of rigs, sometimes even with no float, the precise length of kits or the complete pole are important aspects of modern pole fishing. For this reason our engineers developed the abbreviated Super Sections.
An added benefit off of this design marvel is the amazing transformation of the poles performance. Balance, action and responsiveness are all enhanced; a major asset for fishing at the longer lengths especially when a Super EXT is employed. And when your shipping down to a top four or five to land bigger fish, the extra robust wall strength allows you to exert more pressure.
Daiwa Power Mini PHEX Super Light 5/6 & 7/8
£109.99
Out-of-Stock
Designed to be lighter, especially when coming off the roller, reducing pole drop and tip jump. Aiding reach when fishing short at 5 to 6 or 7 to 8 sections.
Providing a reinforced handling area andprotecting main sections from unnecessary strain and compression, the reversible half extensions provide a variable finsihed fishing length without parts of sections behind you. Fitted with EVA nose cones. Made in the UK.
Daiwa Airity Pro Top Kit Packs
£1,343.99
Last items in stock
Upgrade your current Daiwa pole by adding the new generation of Daiwa Professional top kits. These are the same kit packs that are supplied with the all new Airity Pro 16m pole.
- All kits cut and fitted with PTFE bushes
- All No3 sections fitted with PTFE nose cone
- Interlastic side puller on all kits (except match 4.0mm)
MORE POWER KIT PACK
4 x Professional Commercial Top Kit PTK4.7-AU
4 x Professional Power Top Kit PTK5.8-AU
1 x Professional Top Cupping Kit PTKCK-AU
1 x PMP 7+8 reversible EXT
1 x PMP 5+6 reversible EXT
1 x Cup Set
MORE F1 KIT PACK
4 x Interlastic Speed Kit ILSK5.8-AU
4 x Professional F1 Top Kit PTKF1S4.7-AU
1 x F1 Cupping Kit F1CK1-AU
1 x PMP 7+8 reversible EXT
1 x PMP 5+6 reversible EXT
2 x HS4A
Daiwa Professional Cupping Kit 2.4m
£129.99
In Stock
Designed at 2.4m with a 65cm top for easy filling. Rigid performance with diameter designed to accommodate Daiwa Cup adapator.
- Rigid high grade contruction
- 2.4m with 65cm top
- Diameter designed to take Daiwa Cup adaptor
- 45g
Daiwa Custom Fit Super Light Nose Cones
£7.99
In Stock
Engineered for a perfect fit on all UK made Daiwa poles this selection of nose cones and bushes will transform your pole’s performance with speed of section assembly and elastic travel.
- Super lighweight material
- Custom made in the UK for Daiwa UK made poles
- Speedy section assembly and joint edge protection
- Push and click snug fit on nose cones
Daiwa Generic Interlastic Cloud Kits
£59.99
£64.99
- £5.00
In Stock
- Compatible with UK made poles
- HMC+ Carbon Fibre
- Pre Fitted with Interlastic Puller Bush and PTFE Tip Bush
- Cloud finish
| MODEL | DESCRIPTION | SECTIONS | LENGTH | WGT | RRP |
|---|---|---|---|---|---|
| GITK4.7-AU | COMMERCIAL KIT, 4.7mm | 2 | 2.4m | 59g | £64.99 |
| GITK5.8-AU | POWER KIT, 5.8mm | 2 | 2.4m | 61g | £64.99 |
| GITKF1S4.7-AU | F1 SPEED KIT, 4.7mm | 1 | 1.83m | 39g | £59.99 |
Maver Signature Pro One Piece Smoke Power Kit 1.65m
£62.99
Out-of-Stock
Designed to fit the Signature range of Maver poles.
Maver MV-RXX Short 4 Section
£64.99
In Stock
A short no.4 section to fix the RXX.