Nash MF60 Indulgence 5 Season SS4 MKII
£549.99
£559.99
Top Kits/Accessories
Active filters
Colmic Slim Series Power Top 2 (Fits H1 Slim & Power 100)
£59.99
In Stock
Super Strong, yet incredibly slim long top 2 power kit designed to fit both H1 Slim and Power 100 Margin Poles. They also feature a reinforced area that allows the fitting of side pulla bushes.
**TUBE NO LONGER SUPPLIED WITH KIT**
Colmic EC-200S Colorfull Power Kit
£94.99
In Stock
Brand New for 2019!
Stunning looks combined with the EC200S's immense strength, balance and stiffness makes this a must have for any F-66 owner!
Sky Blue in colour so less visable when fishing shallow.
Fearures a reinforced area to allow the fitting of a side puller.
2.9m in length
3.5mm internal tip diameter
Fits all 'F' Series models
Colmic EC Series 1.8m Combat 1pc Top Kit
£74.99
In Stock
Colmic EC200S-Hyper Power Kit 2.9M
£64.99
Last items in stock
2.9M Power Kit
Fits all popular colmic poles such as Airon F Series, Nucleare and Stinger.
3.65mm Bore Hole at tip
Reinforced section for pulla kits
Woven titanium foil at base of no.2 section for added strength
Supplied with own tube.
Colmic San Siro Mini Extensions
£57.99
Last items in stock
The San Siro mini butt, created specifically for fast fishing close to the bank, has been further developed and can now be used in place of a third section, even with a fully extended 13m pole.
Colmic EC-150 S21 Power Top Kit
£94.99
In Stock
The EC-150 top kits at 2.8m long, all with a reinforced area so your preferred puller kit can be fitted.
Guru Aventus Zero 700/900 Safe Sections
£89.99
Out-of-Stock
Safe Sections come in two sizes, 4/5 and 6/7 and fit the corresponding sections. They protect the poles main sections and are perfect for speed fishing.
Guru Aventus Zero 700/900 Short Number 3 Section
£59.99
In Stock
The short number 3 section makes both Aventus poles even more responsive and are primarily used on commercial fisheries.
Daiwa EVA Pole End Caps
£5.99
In Stock
Our EVA Pole End Caps are designed to replace traditional hard plastic caps. They are easy to remove and feature raised ribs to protect sections against the tube sides or other pole sections when packed in a hardcase.
Additionally they offer protection to the end of the section when in use. Be it shipping back into any undergrowth or just through handling.
Available in the following sizes; 43.7mm (fits top of 9th), 45.5mm (fits top of 10th), 46.8mm (fits the bottom of 9th & top of 11th), 48.6mm (fits bottom of 10th & 11th) & a pack including 1x 26.7mm & 1x 35.4mm for Top & Bottom of 5th section.
Colmic EC Series 2.6m Combat Top 2 Kit
£69.99
In Stock
Daiwa Generic Interlastic Kits
£59.99
In Stock
- Compatible with UK made poles
- HMC+ Carbon Fibre
- Pre Fitted with Interlastic Puller Bush and PTFE Tip Bush
| MODEL | DESCRIPTION | SECTIONS | LENGTH | WGT | RRP |
|---|---|---|---|---|---|
| GITK4.7-AU | COMMERCIAL KIT, 4.7mm | 2 | 2.4m | 59g | £59.99 |
| GITK5.8-AU | POWER KIT, 5.8mm | 2 | 2.4m | 61g | £59.99 |
| GITKF1S4.7-AU | F1 SPEED KIT, 4.7mm | 1 | 1.83m | 39g | £49.99 |
Daiwa Professional Interlastic Commercial Kit 2.4m - 4.7mm
£154.99
In Stock
Two piece Commercial Interlastic kit designed for up to Grey to Black Hydro. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 4.7mm tip
- Fitted with Interlastic plus PTFE bush and No3 nose cone
Daiwa Professional Interlastic Power Kit 2.4m - 5.8mm
£154.99
In Stock
Two piece Power Interlastic kit designed for up to Red Hydro. Taper designed to assist rigidity. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 5.8mm tip
- Taper and rigidity designed for powerful set ups
- Fitted with Interlastic plus PTFE bush and No3 nose cone.
Daiwa Professional F1 Speed Cloud Kit 1.83m - 4.7mm
£124.99
£134.99
- £10.00
In Stock
Redesigned F1 kit bringing enhanced balance and recovery. Features Interlastic and PTFE bush. Cloud finish down to side puller.
- High grade carbon construction
- Single 1.8m section with 4.7mm tip
- Adds enhnaced balance and recovery
- Cloud finish throughout
- Fitted with Interlastic and PTFE bush
Daiwa Professional Match Kit 2.4m - 4.0mm
£139.99
In Stock
Two piece 2.4m match kit. High grade carbon construction. Near equal length sections, with PTFE bush and No3 nose cone. Also features a reinforced wrap for side pullers.
- High grade carbon construction
- 2.4m with 4.0mm tip
- Near equal two section assembly
- PTFE bush and No3 nose cone
- Reinforced wrap for side puller fitting
Daiwa Super 4th Section (Short)
£74.99
Out-of-Stock
As more anglers fish tight to features or with exact lengths of rigs, sometimes even with no float, the precise length of kits or the complete pole are important aspects of modern pole fishing. For this reason our engineers developed the abbreviated Super Sections.
An added benefit off of this design marvel is the amazing transformation of the poles performance. Balance, action and responsiveness are all enhanced; a major asset for fishing at the longer lengths especially when a Super EXT is employed. And when your shipping down to a top four or five to land bigger fish, the extra robust wall strength allows you to exert more pressure.
Guru Aventus Carp Power Kit 5.8m
£113.99
In Stock
The Guru Aventus Carp Power Kit has been developed to cover all your big fish work. The thick 5.8mm tip bore size makes this the perfect top kit option for thicker pole elastics. Whether you’re fishing for big fish on a natural venue or bagging down the margins in warmer months this top kit will handle anything you can throw at it.
Guru Aventus Match Power Kit 4.7mm
£112.50
In Stock
The Guru Aventus Match Power Kit is a true all-round top kit that is extremely versatile, aimed to cover most pole fishing situations, on both commercial and natural venues. Featuring a 4.7mm tip bore size, suiting thin to medium pole elastics perfectly.