Nash MF60 Indulgence 5 Season SS4 MKII
£549.99
£559.99
Top Kits/Accessories
Active filters
Preston Innovations DWA F1 SHORT STOP ROLLER PULLA KIT - GREY
£59.99
Out-of-Stock
Female base end diameter 18mm
Fits perfectly on top en Daiwa poles.
Preston Edge Monster Power Top 2 Kit
£44.99
Last items in stock
- An ultra strong power Top Two Kit
- Features a built in Roller pulla
- Supplied pre fitted with a PTFE bush
Preston Innovations Superium Top Kits
£54.99
£64.99
- £10.00
In Stock
A full range of spare and replacement top kits for your Superium series pole. All the top kits listed here are interchangeable across the range, choose from Match, F1, Grey F1, F1 Short, Carp & Kup Kits.
Preston Innovations DWA SHORT STOP ROLLER PULLA KIT
£54.99
Last items in stock
Female base end diameter 18mm
Fits perfectly on top end Daiwa poles.
Preston Innovations ProType Kup KIt (24mm)
£54.99
Out-of-Stock
Manufactured from high quality carbon to make them as stiff as possible when cupping in bait, especially at long range. Designed with a long reinforcement to the base of the largest section so it can be cut back as required.
ProType diameter : 24mm
Daiwa EVA Pole End Caps
£5.99
In Stock
Our EVA Pole End Caps are designed to replace traditional hard plastic caps. They are easy to remove and feature raised ribs to protect sections against the tube sides or other pole sections when packed in a hardcase.
Additionally they offer protection to the end of the section when in use. Be it shipping back into any undergrowth or just through handling.
Available in the following sizes; 43.7mm (fits top of 9th), 45.5mm (fits top of 10th), 46.8mm (fits the bottom of 9th & top of 11th), 48.6mm (fits bottom of 10th & 11th) & a pack including 1x 26.7mm & 1x 35.4mm for Top & Bottom of 5th section.
Maver MV-RXX X Series Topkits
£79.99
In Stock
Brand new X-Series 18mm topkits that not only fit the flagship MV-RXX pole, but also other poles on the market sharing the same bore size. To save you both time and money, our topkits come pre-bushed with our revolutionary roller slots pre-installed too.
Maver X-Series 1-piece Power Kits
£79.99
In Stock
Our brand new X-Series 1-piece power kits are designed to fit our MV-RXX flagship model, bearing an 18mm bore.
Just 185cm long, these are ideal for any anglers preferring a shorter length of topkit to gain ultimate control over the fish!
Our revolutionary roller slots come pre-installed, saving you time and money. All that’s left is to add an elastic of choice.
Available in a ‘black’ or ‘smoke’ colour.
Maver MV-R Series Commercial Power Kit
£69.99
In Stock
A spare Commercial Power Kit for your Maver MV-R series pole. Supplied as standard with the R1, R2, R3 and R4 MV-R pole packages. These are ideal if you've managed to damage the top kits supplied with the pole offering you an exact replacement.
Features
- Commercial Power Kit
- Roller slot pre-fitted
- Fits the MVR-R1, R2, R3 and R4 pole range
Maver Signature Smoke 1pc Power Kit
£64.99
In Stock
Signature Smoke Power Kit with slot.
Also fits MV-R Series poles.
Preston Innovations Pole Kup Set
£7.99
In Stock
The Preston Innovations Pole Kup Set gives you both a 125ml and 250ml sized cup plus an adapter. The cups themselves are strong and lightweight, and feature holes in the bottom to help that bait release when you flip them over. Ideal for feeding a variety of baits with pinpoint accuracy.
Daiwa Generic Interlastic Kits
£59.99
In Stock
- Compatible with UK made poles
- HMC+ Carbon Fibre
- Pre Fitted with Interlastic Puller Bush and PTFE Tip Bush
| MODEL | DESCRIPTION | SECTIONS | LENGTH | WGT | RRP |
|---|---|---|---|---|---|
| GITK4.7-AU | COMMERCIAL KIT, 4.7mm | 2 | 2.4m | 59g | £59.99 |
| GITK5.8-AU | POWER KIT, 5.8mm | 2 | 2.4m | 61g | £59.99 |
| GITKF1S4.7-AU | F1 SPEED KIT, 4.7mm | 1 | 1.83m | 39g | £49.99 |
Daiwa Professional Interlastic Commercial Kit 2.4m - 4.7mm
£154.99
In Stock
Two piece Commercial Interlastic kit designed for up to Grey to Black Hydro. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 4.7mm tip
- Fitted with Interlastic plus PTFE bush and No3 nose cone
Daiwa Professional Interlastic Power Kit 2.4m - 5.8mm
£154.99
In Stock
Two piece Power Interlastic kit designed for up to Red Hydro. Taper designed to assist rigidity. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 5.8mm tip
- Taper and rigidity designed for powerful set ups
- Fitted with Interlastic plus PTFE bush and No3 nose cone.
Daiwa Professional F1 Speed Cloud Kit 1.83m - 4.7mm
£124.99
£134.99
- £10.00
In Stock
Redesigned F1 kit bringing enhanced balance and recovery. Features Interlastic and PTFE bush. Cloud finish down to side puller.
- High grade carbon construction
- Single 1.8m section with 4.7mm tip
- Adds enhnaced balance and recovery
- Cloud finish throughout
- Fitted with Interlastic and PTFE bush
Daiwa Professional Match Kit 2.4m - 4.0mm
£139.99
In Stock
Two piece 2.4m match kit. High grade carbon construction. Near equal length sections, with PTFE bush and No3 nose cone. Also features a reinforced wrap for side pullers.
- High grade carbon construction
- 2.4m with 4.0mm tip
- Near equal two section assembly
- PTFE bush and No3 nose cone
- Reinforced wrap for side puller fitting
Daiwa Super 4th Section (Short)
£74.99
Out-of-Stock
As more anglers fish tight to features or with exact lengths of rigs, sometimes even with no float, the precise length of kits or the complete pole are important aspects of modern pole fishing. For this reason our engineers developed the abbreviated Super Sections.
An added benefit off of this design marvel is the amazing transformation of the poles performance. Balance, action and responsiveness are all enhanced; a major asset for fishing at the longer lengths especially when a Super EXT is employed. And when your shipping down to a top four or five to land bigger fish, the extra robust wall strength allows you to exert more pressure.
Daiwa Power Mini PHEX Super Light 5/6 & 7/8
£109.99
Last items in stock
Designed to be lighter, especially when coming off the roller, reducing pole drop and tip jump. Aiding reach when fishing short at 5 to 6 or 7 to 8 sections.
Providing a reinforced handling area andprotecting main sections from unnecessary strain and compression, the reversible half extensions provide a variable finsihed fishing length without parts of sections behind you. Fitted with EVA nose cones. Made in the UK.