Top Kits/Accessories
Active filters
Colmic Slim Series Power Top 2 (Fits H1 Slim & Power 100)
Super Strong, yet incredibly slim long top 2 power kit designed to fit both H1 Slim and Power 100 Margin Poles. They also feature a reinforced area that allows the fitting of side pulla bushes.
**TUBE NO LONGER SUPPLIED WITH KIT**
Colmic EC-200S Colorfull Power Kit
Brand New for 2019!
Stunning looks combined with the EC200S's immense strength, balance and stiffness makes this a must have for any F-66 owner!
Sky Blue in colour so less visable when fishing shallow.
Fearures a reinforced area to allow the fitting of a side puller.
2.9m in length
3.5mm internal tip diameter
Fits all 'F' Series models
Colmic EC Series 1.8m Combat 1pc Top Kit
Colmic EC200S-Hyper Power Kit 2.9M
2.9M Power Kit
Fits all popular colmic poles such as Airon F Series, Nucleare and Stinger.
3.65mm Bore Hole at tip
Reinforced section for pulla kits
Woven titanium foil at base of no.2 section for added strength
Supplied with own tube.
Colmic San Siro Mini Extensions
The San Siro mini butt, created specifically for fast fishing close to the bank, has been further developed and can now be used in place of a third section, even with a fully extended 13m pole.
Colmic EC-150 S21 Power Top Kit
The EC-150 top kits at 2.8m long, all with a reinforced area so your preferred puller kit can be fitted.
Daiwa EVA Pole End Caps
Our EVA Pole End Caps are designed to replace traditional hard plastic caps. They are easy to remove and feature raised ribs to protect sections against the tube sides or other pole sections when packed in a hardcase.
Additionally they offer protection to the end of the section when in use. Be it shipping back into any undergrowth or just through handling.
Available in the following sizes; 43.7mm (fits top of 9th), 45.5mm (fits top of 10th), 46.8mm (fits the bottom of 9th & top of 11th), 48.6mm (fits bottom of 10th & 11th) & a pack including 1x 26.7mm & 1x 35.4mm for Top & Bottom of 5th section.
Colmic EC Series 2.6m Combat Top 2 Kit
Maver MV-RXX X Series Topkits
Brand new X-Series 18mm topkits that not only fit the flagship MV-RXX pole, but also other poles on the market sharing the same bore size. To save you both time and money, our topkits come pre-bushed with our revolutionary roller slots pre-installed too.
Maver X-Series 1-piece Power Kits
Our brand new X-Series 1-piece power kits are designed to fit our MV-RXX flagship model, bearing an 18mm bore.
Just 185cm long, these are ideal for any anglers preferring a shorter length of topkit to gain ultimate control over the fish!
Our revolutionary roller slots come pre-installed, saving you time and money. All that’s left is to add an elastic of choice.
Available in a ‘black’ or ‘smoke’ colour.
Maver MV-R Series Commercial Power Kit
A spare Commercial Power Kit for your Maver MV-R series pole. Supplied as standard with the R1, R2, R3 and R4 MV-R pole packages. These are ideal if you've managed to damage the top kits supplied with the pole offering you an exact replacement.
Features
- Commercial Power Kit
- Roller slot pre-fitted
- Fits the MVR-R1, R2, R3 and R4 pole range
Maver Signature Smoke 1pc Power Kit
Signature Smoke Power Kit with slot.
Also fits MV-R Series poles.
Daiwa Generic Interlastic Kits
- Compatible with UK made poles
- HMC+ Carbon Fibre
- Pre Fitted with Interlastic Puller Bush and PTFE Tip Bush
MODEL | DESCRIPTION | SECTIONS | LENGTH | WGT | RRP |
---|---|---|---|---|---|
GITK4.7-AU | COMMERCIAL KIT, 4.7mm | 2 | 2.4m | 59g | £59.99 |
GITK5.8-AU | POWER KIT, 5.8mm | 2 | 2.4m | 61g | £59.99 |
GITKF1S4.7-AU | F1 SPEED KIT, 4.7mm | 1 | 1.83m | 39g | £49.99 |
Daiwa Professional Interlastic Commercial Kit 2.4m - 4.7mm
Two piece Commercial Interlastic kit designed for up to Grey to Black Hydro. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 4.7mm tip
- Fitted with Interlastic plus PTFE bush and No3 nose cone
Daiwa Professional Interlastic Power Kit 2.4m - 5.8mm
Two piece Power Interlastic kit designed for up to Red Hydro. Taper designed to assist rigidity. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 5.8mm tip
- Taper and rigidity designed for powerful set ups
- Fitted with Interlastic plus PTFE bush and No3 nose cone.
Daiwa Professional F1 Speed Cloud Kit 1.83m - 4.7mm
Redesigned F1 kit bringing enhanced balance and recovery. Features Interlastic and PTFE bush. Cloud finish down to side puller.
- High grade carbon construction
- Single 1.8m section with 4.7mm tip
- Adds enhnaced balance and recovery
- Cloud finish throughout
- Fitted with Interlastic and PTFE bush
Daiwa Professional Match Kit 2.4m - 4.0mm
Two piece 2.4m match kit. High grade carbon construction. Near equal length sections, with PTFE bush and No3 nose cone. Also features a reinforced wrap for side pullers.
- High grade carbon construction
- 2.4m with 4.0mm tip
- Near equal two section assembly
- PTFE bush and No3 nose cone
- Reinforced wrap for side puller fitting
Daiwa Super 4th Section (Short)
As more anglers fish tight to features or with exact lengths of rigs, sometimes even with no float, the precise length of kits or the complete pole are important aspects of modern pole fishing. For this reason our engineers developed the abbreviated Super Sections.
An added benefit off of this design marvel is the amazing transformation of the poles performance. Balance, action and responsiveness are all enhanced; a major asset for fishing at the longer lengths especially when a Super EXT is employed. And when your shipping down to a top four or five to land bigger fish, the extra robust wall strength allows you to exert more pressure.