Top Kits/Accessories
Active filters
Garbolino Twin & Compact Power 3
UK Series compatible - A clever new designed 'split section 3' - Gives definate advantages - Can be used as a full section when fixed together but enables the angler to unship 'half' sections, perfect when swinging small fish to hand or where you need a little bit extra when playing big fish, or in deep water - The A section is conical which can be used as a stiff "short 3" on its own as it fits straight into the section 4 - The B section is parallel so can be used in conjunction with the A section as a full length section 3 - A brilliant versatile addition to your pole, giving you a lot more versatility - Sold as a kit or separately
Daiwa EVA Pole End Caps
Our EVA Pole End Caps are designed to replace traditional hard plastic caps. They are easy to remove and feature raised ribs to protect sections against the tube sides or other pole sections when packed in a hardcase.
Additionally they offer protection to the end of the section when in use. Be it shipping back into any undergrowth or just through handling.
Available in the following sizes; 43.7mm (fits top of 9th), 45.5mm (fits top of 10th), 46.8mm (fits the bottom of 9th & top of 11th), 48.6mm (fits bottom of 10th & 11th) & a pack including 1x 26.7mm & 1x 35.4mm for Top & Bottom of 5th section.
Garbolino Zombie Match K2 Power Puller ELC Kit
Great value puller kit that will fit all current UK mandrel poles.
Garbolino K2 Silver Match Top 2 Kit
A range of Top 2 kits to fit the current UK and 900X mandresl. These high quality carbon kits are all 2.65m in length and feature elastic ratings of both solid and hollow printed on the kits. These offer a huge variation in quality from the extremely light but stiff Gold Competition Match Kit to our Leisure Carp Kit.
Pre cut and bushed with the highest quality PTFE internal bushes. Four different variations of top kit are available to suit your specific angling needs and budget. Please be aware that these kits are match and power kits which DO NOT feature a side puller system.
Silver Match Kit - 1.4 Single 2.1 Hollow - 34g
Garbolino K2 - Power Carp Puller Top 2 Kit
These kits all fit current Garbolino UK poles and older models on the 'G' Mandrel.
All kits are 2.65m in length and are 2 piece take apart design.
Pre cut with external bushed using quality PTFE
High quality PTFE Garbolino integeral puller system
Colmic EC Series 2.6m Combat Top 2 Kit
Daiwa Generic Interlastic Kits
- Compatible with UK made poles
- HMC+ Carbon Fibre
- Pre Fitted with Interlastic Puller Bush and PTFE Tip Bush
| MODEL | DESCRIPTION | SECTIONS | LENGTH | WGT | RRP |
|---|---|---|---|---|---|
| GITK4.7-AU | COMMERCIAL KIT, 4.7mm | 2 | 2.4m | 59g | £59.99 |
| GITK5.8-AU | POWER KIT, 5.8mm | 2 | 2.4m | 61g | £59.99 |
| GITKF1S4.7-AU | F1 SPEED KIT, 4.7mm | 1 | 1.83m | 39g | £49.99 |
Garbolino UK Series Spare Sections
Spare sections to fit the current/previous Garbolino UK series of poles.
Matrix MTX4 Ultra V2 Spare Sections
Matrix MTX4 Ultra V2 Spare Sections
Matrix MTX3 Ultra V2 Spare Sections
Matrix MTX3 Ultra V2 Spare Sections
Matrix MTX5 Ultra V2 Spare Sections
Matrix MTX5 Ultra V2 Spare Sections
Daiwa Professional Interlastic Commercial Kit 2.4m - 4.7mm
Two piece Commercial Interlastic kit designed for up to Grey to Black Hydro. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 4.7mm tip
- Fitted with Interlastic plus PTFE bush and No3 nose cone
Daiwa Professional Interlastic Power Kit 2.4m - 5.8mm
Two piece Power Interlastic kit designed for up to Red Hydro. Taper designed to assist rigidity. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 5.8mm tip
- Taper and rigidity designed for powerful set ups
- Fitted with Interlastic plus PTFE bush and No3 nose cone.
Daiwa Professional F1 Speed Cloud Kit 1.83m - 4.7mm
Redesigned F1 kit bringing enhanced balance and recovery. Features Interlastic and PTFE bush. Cloud finish down to side puller.
- High grade carbon construction
- Single 1.8m section with 4.7mm tip
- Adds enhnaced balance and recovery
- Cloud finish throughout
- Fitted with Interlastic and PTFE bush
Daiwa Professional Match Kit 2.4m - 4.0mm
Two piece 2.4m match kit. High grade carbon construction. Near equal length sections, with PTFE bush and No3 nose cone. Also features a reinforced wrap for side pullers.
- High grade carbon construction
- 2.4m with 4.0mm tip
- Near equal two section assembly
- PTFE bush and No3 nose cone
- Reinforced wrap for side puller fitting
Daiwa Super 4th Section (Short)
As more anglers fish tight to features or with exact lengths of rigs, sometimes even with no float, the precise length of kits or the complete pole are important aspects of modern pole fishing. For this reason our engineers developed the abbreviated Super Sections.
An added benefit off of this design marvel is the amazing transformation of the poles performance. Balance, action and responsiveness are all enhanced; a major asset for fishing at the longer lengths especially when a Super EXT is employed. And when your shipping down to a top four or five to land bigger fish, the extra robust wall strength allows you to exert more pressure.
Guru Aventus Carp Power Kit 5.8m
The Guru Aventus Carp Power Kit has been developed to cover all your big fish work. The thick 5.8mm tip bore size makes this the perfect top kit option for thicker pole elastics. Whether you’re fishing for big fish on a natural venue or bagging down the margins in warmer months this top kit will handle anything you can throw at it.
Guru Aventus Match Power Kit 4.7mm
The Guru Aventus Match Power Kit is a true all-round top kit that is extremely versatile, aimed to cover most pole fishing situations, on both commercial and natural venues. Featuring a 4.7mm tip bore size, suiting thin to medium pole elastics perfectly.

