Top Kits/Accessories
Active filters
Garbolino Zombie Match K2 Power Puller ELC Kit
Great value puller kit that will fit all current UK mandrel poles.
Garbolino K2 Silver Match Top 2 Kit
A range of Top 2 kits to fit the current UK and 900X mandresl. These high quality carbon kits are all 2.65m in length and feature elastic ratings of both solid and hollow printed on the kits. These offer a huge variation in quality from the extremely light but stiff Gold Competition Match Kit to our Leisure Carp Kit.
Pre cut and bushed with the highest quality PTFE internal bushes. Four different variations of top kit are available to suit your specific angling needs and budget. Please be aware that these kits are match and power kits which DO NOT feature a side puller system.
Silver Match Kit - 1.4 Single 2.1 Hollow - 34g
Garbolino K2 - Power Carp Puller Top 2 Kit
These kits all fit current Garbolino UK poles and older models on the 'G' Mandrel.
All kits are 2.65m in length and are 2 piece take apart design.
Pre cut with external bushed using quality PTFE
High quality PTFE Garbolino integeral puller system
Colmic EC Series 2.6m Combat Top 2 Kit
Daiwa Generic Interlastic Kits
- Compatible with UK made poles
- HMC+ Carbon Fibre
- Pre Fitted with Interlastic Puller Bush and PTFE Tip Bush
| MODEL | DESCRIPTION | SECTIONS | LENGTH | WGT | RRP |
|---|---|---|---|---|---|
| GITK4.7-AU | COMMERCIAL KIT, 4.7mm | 2 | 2.4m | 59g | £59.99 |
| GITK5.8-AU | POWER KIT, 5.8mm | 2 | 2.4m | 61g | £59.99 |
| GITKF1S4.7-AU | F1 SPEED KIT, 4.7mm | 1 | 1.83m | 39g | £49.99 |
Garbolino UK Series Spare Sections
Spare sections to fit the current/previous Garbolino UK series of poles.
Matrix MTX4 Ultra V2 Spare Sections
Matrix MTX4 Ultra V2 Spare Sections
Matrix MTX3 Ultra V2 Spare Sections
Matrix MTX3 Ultra V2 Spare Sections
Matrix MTX5 Ultra V2 Spare Sections
Matrix MTX5 Ultra V2 Spare Sections
Daiwa Professional Interlastic Commercial Kit 2.4m - 4.7mm
Two piece Commercial Interlastic kit designed for up to Grey to Black Hydro. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 4.7mm tip
- Fitted with Interlastic plus PTFE bush and No3 nose cone
Daiwa Professional Interlastic Power Kit 2.4m - 5.8mm
Two piece Power Interlastic kit designed for up to Red Hydro. Taper designed to assist rigidity. High grade carbon construction. Fitted with PTFE bush and No3 nose cone.
- High grade carbon construction
- 2.4m with 5.8mm tip
- Taper and rigidity designed for powerful set ups
- Fitted with Interlastic plus PTFE bush and No3 nose cone.
Daiwa Professional F1 Speed Cloud Kit 1.83m - 4.7mm
Redesigned F1 kit bringing enhanced balance and recovery. Features Interlastic and PTFE bush. Cloud finish down to side puller.
- High grade carbon construction
- Single 1.8m section with 4.7mm tip
- Adds enhnaced balance and recovery
- Cloud finish throughout
- Fitted with Interlastic and PTFE bush
Daiwa Professional Match Kit 2.4m - 4.0mm
Two piece 2.4m match kit. High grade carbon construction. Near equal length sections, with PTFE bush and No3 nose cone. Also features a reinforced wrap for side pullers.
- High grade carbon construction
- 2.4m with 4.0mm tip
- Near equal two section assembly
- PTFE bush and No3 nose cone
- Reinforced wrap for side puller fitting
Daiwa Super 4th Section (Short)
As more anglers fish tight to features or with exact lengths of rigs, sometimes even with no float, the precise length of kits or the complete pole are important aspects of modern pole fishing. For this reason our engineers developed the abbreviated Super Sections.
An added benefit off of this design marvel is the amazing transformation of the poles performance. Balance, action and responsiveness are all enhanced; a major asset for fishing at the longer lengths especially when a Super EXT is employed. And when your shipping down to a top four or five to land bigger fish, the extra robust wall strength allows you to exert more pressure.
Garbolino K2 - Match Carp Puller Top 2 Kit
These kits all fit current Garbolino UK poles and older models on the 'G' Mandrel.
All kits are 2.65m in length and are 2 piece take apart design.
Pre cut with external bushed using quality PTFE
High quality PTFE Garbolino integeral puller system
Daiwa Power Mini PHEX Super Light 5/6 & 7/8
Providing a reinforced handling area andprotecting main sections from unnecessary strain and compression, the reversible half extensions provide a variable finsihed fishing length without parts of sections behind you. Fitted with EVA nose cones. Made in the UK.
Daiwa Airity Pro Top Kit Packs
Upgrade your current Daiwa pole by adding the new generation of Daiwa Professional top kits. These are the same kit packs that are supplied with the all new Airity Pro 16m pole.
- All kits cut and fitted with PTFE bushes
- All No3 sections fitted with PTFE nose cone
- Interlastic side puller on all kits (except match 4.0mm)
MORE POWER KIT PACK
4 x Professional Commercial Top Kit PTK4.7-AU
4 x Professional Power Top Kit PTK5.8-AU
1 x Professional Top Cupping Kit PTKCK-AU
1 x PMP 7+8 reversible EXT
1 x PMP 5+6 reversible EXT
1 x Cup Set
MORE F1 KIT PACK
4 x Interlastic Speed Kit ILSK5.8-AU
4 x Professional F1 Top Kit PTKF1S4.7-AU
1 x F1 Cupping Kit F1CK1-AU
1 x PMP 7+8 reversible EXT
1 x PMP 5+6 reversible EXT
2 x HS4A
Daiwa Professional Cupping Kit 2.4m
Designed at 2.4m with a 65cm top for easy filling. Rigid performance with diameter designed to accommodate Daiwa Cup adapator.
- Rigid high grade contruction
- 2.4m with 65cm top
- Diameter designed to take Daiwa Cup adaptor
- 45g

